How to choose the type of bottle blowing machine they need, presumably also is the topic of most concern.

In general, according to their own products to choose the type of bottle blowing machine. The use of different dosage of the manufacturers, the general concern is that a few cavities, the size of the bottle capacity, and per hour of output.

Through their own needs to choose the model is very critical to meet their needs. Today, the domestic do blow bottle machine manufacturers are quite many, choose a good brand manufacturers on the basis of the price is right should also is a key consideration, relatively large blow molding machine manufacturers mainly concentrated in Taizhou, Zhejiang. And there are many manufacturers have independent design and production capacity, according to the requirements of customers to a special required models, and has a huge plant distribution to all parts of the production and processing, coupled with good after-sales service system to the customer to provide intimate technology support.

Operation steps

Step 1 place the bottle embryo in the bottle embryo container, and automatically enter the bottle embryo positioning device through the conveying device.

Step 2 automatically loading the bottle mouth of the bottle into the bottle embryo holder and feeding the bottle to the bottle.

Step 3 after heating, the bottle embryos were sent to blow to pull on the platform, then lock mode, successively by low-pressure blow pull, high-pressure blow pull, exhaust, and finally die.

Step 4 into the bottle by the automatic stripping system from the bottle blowing platform to take down.

PETBottle blowing machineProfessional manufacturerASNTO| SNTO |Plastic bottle blowing machine|Huangyan Zhejiang plasticA machinery plant